Audio Reverb / Echo
Add reverb or echo effect to audio files to create space and depth. Perfect for adding atmosphere to vocals, instruments, and recordings. Adjustable decay and mix parameters.
Drop your audio file here
or click to browse
Complete Guide: Audio Reverb / Echo
Everything you need to know about using this tool effectively
The Audio Reverb Tool adds reverb and echo effects to your audio files, simulating the natural reflections of sound in a physical space. Adjust the decay time to control how long the reverb tail lasts, and use the mix control to blend the effect with your original dry signal. Everything runs in your browser - no uploads, no accounts, no waiting.
This tool uses the Web Audio API's ConvolverNode to simulate acoustic reflections, adding reverb and echo to your audio. Adjust decay time and wet/dry mix to control the size and intensity of the effect.
Adding Space to Dry Vocal Takes
Vocals recorded in a treated room or closet often sound flat and lifeless because there are almost no natural reflections. Adding a short reverb gives the voice a sense of space and makes it feel like it was recorded in a real room rather than a padded box.
Creating Atmosphere for Podcasts and Narration
A subtle touch of reverb on a podcast intro, dramatic narration, or audiobook passage can set a mood and signal a change in tone. Use a short decay with a low mix to keep it professional, or go longer for a more cinematic feel.
Sound Design for Video Projects
Match audio to the visual environment in a video. Dialogue in a cathedral scene should sound different from dialogue in a small office. Reverb helps sell the illusion by simulating the acoustic properties of the space shown on screen.
Thickening Instrument Recordings
Solo instruments like acoustic guitar, piano, or strings can sound isolated without any room sound. A moderate reverb fills in the gaps and gives the recording a fuller, more polished quality without changing the performance itself.
Creating Echo and Delay Effects
With longer decay settings and a higher mix, the tool produces noticeable echo and trail effects useful for creative sound design, transition effects in audio projects, or stylized vocal treatments.
Upload Your Audio
Click the upload area or drag and drop your audio file into the interface. The tool supports MP3, WAV, OGG, FLAC, and other common audio formats.
Set the Decay Time
Adjust the decay time to control how long the reverb rings out. Short values (under 1 second) sound like a small room. Longer values (2–5 seconds) create the feel of a hall or large open space.
Adjust the Wet/Dry Mix
The mix control sets the balance between your original audio (dry) and the reverb effect (wet). A low mix adds subtle ambience. A higher mix pushes the effect to the front, making the reverb more prominent than the source.
Preview the Effect
Play back the processed audio to hear how the reverb sounds with your recording. Listen for whether the tail length and mix level match what you're going for.
Fine-Tune and Download
If the reverb is too much or too little, go back and adjust the decay and mix until it sounds right. When you're satisfied, download the processed file.
Listen to reverb in the context of your full project and dial it back until it supports the audio without drawing attention to itself
Match reverb to the space - a bathroom needs short, bright reverb while a concert hall needs longer, darker tails
For spoken word, keep decay under 1.5 seconds so reverb tails don't overlap with the next word
Always save a copy of the original dry recording - you can add reverb later but can't remove it once baked in
Normalize your audio first to get consistent levels before applying reverb, since the effect responds differently to quiet versus loud signals
What's the difference between reverb and echo?
Reverb is made up of many closely spaced reflections that blend together into a continuous wash of sound, like clapping in a tiled bathroom. Echo is when reflections are spaced far enough apart that you hear distinct repeats, like shouting across a canyon. This tool can produce both depending on your decay and mix settings.
What decay time should I use?
It depends on the effect you want. For a subtle room ambience, try 0.3–1 second. For a natural hall sound, 1.5–3 seconds works well. For dramatic or creative effects, go above 3 seconds. Start shorter and increase until it feels right for your material.
Will adding reverb make my audio sound muddy?
It can if the decay is too long or the mix is too high, especially on audio that already has a lot of low-frequency content. If things start sounding washy, reduce the decay time or lower the mix level. Applying a high-pass filter before adding reverb can also help keep things clean.
Does this tool upload my files to a server?
No. All audio processing happens locally in your browser using the Web Audio API. Your files never leave your device, so your recordings remain completely private.
Can I remove reverb from audio that already has it?
This tool adds reverb - it doesn't remove it. Removing reverb from a recording is a much more complex process that requires specialized de-reverb software. If your source audio already has reverb baked in, adding more will compound the effect.
What audio formats are supported?
The tool works with any audio format your browser supports, which typically includes MP3, WAV, OGG, FLAC, AAC, and WebM. If your browser can play the file, this tool can process it.